Roofs do not have to be identical. With so many great choices on the market, you may want to reconsider what you’re planning and suggest a different roofing material for roof replacement. Many less well-known alternatives will outlast asphalt shingles and other typical products, and some can even help you save money on your energy bill! And, if you’re building a low-slope roof, shingles aren’t likely to fit.
Stone-coated metal roofing, also known as stone-coated steel roofing, has a deep, decorative profile that can emulate the appearance of wood shakes, asphalt shingles, or clay tiles. This quality roofing material has a 50-year warranty and highly ranked for hail, wind, and fire resistance.
It’s corrosion-resistant metal coated with crushed granite, which is firmly fixed to it. Unlike the mineral coating on asphalt shingles, the granite coating intended not to slough off over time. Usually, the stone-coated metal roofing covers wood strips, or battens, which cause air channels between the roof deck and the roofing. These air spaces act as protection, keeping the roof deck cool in the summer and preventing ice jams in the winter.
On low-sloped roofs, built-up roofing is the most common roofing material. Built-up roofing is complete by adding an aggregate layer or coating to the top layer, which comprises many bitumen surfaces. The top layer is usually tar, which is covered with gravel. Smooth asphalt (hot or cold) and ballasted asphalt are examples of built-up roofs. Decking, insulation, ply sheets (reinforcing fabrics), and one or more surfacing materials are the four essential components of all forms.
Asphalt or other bitumen material is used to bind the layers together. The roof’s cost and reliability are influenced by the form of surface coating applied. For energy efficiency, most built-up roofs today have a layer of rigid insulation.
Solar shingles are a roofing material that often acts as an alternative to traditional rooftop solar panels. Solar shingles and other solar roofing items make elastic “thin-film” solar technology, but today’s solar shingles are typically rigid materials like tempered glass. Of course, the most important advantage of solar shingles is that they produce energy during the day. Consequently, roofing begins to pay for itself from the day it is built and continues to do so throughout the system’s lifespan. It’s the only roofing material that gives you an economic return on your money.
Single-ply roofing is a standard commercial roofing alternative that can be used on any roof slope. Thermoset and thermoplastic are the two primary styles of single-ply roofing. Layers of synthetic rubber polymers such as EPDM, CSPE, and Neoprene use to make thermoset membranes.
Because of their large scale, they are generally used for large roof areas. For shaping cohesive laps, thermoplastic single-ply membranes are often hot-air welded together. The thermoplastic material back to its normal state as it cools, forming a permanent bond. For quality and rigidity, thermoplastic membranes typically contain a polyester or fiberglass reinforcing layer.
Standing Seam Roofing
Standing seam roofing is a form of metal roofing that consists of vertical panels with two vertical seams per panel. Modern corrugated metal roofing has a more polished look and is less durable. Galvanized steel, Galvalume, and copper are traditional materials for standing seam roofing. Over standard plywood roof decking and an authorized underlayment, such as an ice-and-water shield, standing seam panels are mounted.
I hope the blog enlightened you on all the roofing replacement options!